Xylem handylab pH LF 12 User Manual download pdf (Page 57)

handylab pH/LF 12 Operation

ba75370e03 11/2009

4.7 Transmitting data

You have the following possibilities of transmitting data:

z One of the following options:

– With the AutoStore function (page 49), measured values are

periodically saved internally (save interval Int 1) and output on the

interface.

– With the Data transmission interval function (Int 2), measured values

are periodically output on the interface (see below).

z With the Output data storage function (page 51), calibration data or saved

measured values are output on the interface.

4.7.1 Data transmission interval (Int 2)

The interval to the data transmission (Int 2) determines the chronological in-

terval between automatic data transmissions. After the selected interval ex-

pires, the current data record is transmitted to the interface.

Note

The setting of the interval (Int 2) is only effective if the save interval

(AutoStore function) is switched off!

Setting the

Data transmission

interval

The default setting for the interval is OFF.

To start the data transmission, set an interval (5 s, 10 s, 30 s, 1 min, 5 min,

10 min, 15 min, 30 min, 60 min):

1 Press the <RUN/ENTER> key and hold it down.

2 Press the <RCL> key. Int 2 appears on the display.

3 Set the required interval between the saving procedures with

<▲> <▼>.

4 Confirm with <RUN/ENTER>.

The measuring instrument switches to the last active measur-

ing mode.

Store

Auto

LoBat

Tref25

nLF

RCL

Sal

mg/l

ARng

Cal

Lin

Tref20

Sal

TDS

mbar

OUpH

mV/pH

AutoCal DIN

AutoCal TEC

Time

Baud

Day.Month No.

Ident

Year

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 79 80

Comments to this Manuals

No comments

Xylem handylab pH LF 12 User Manual Page 57

Comments to this Manuals

Related products and manuals for Tools Xylem handylab pH LF 12