Xylem MM 209D Series 6667 Replacement Mechanism User Manual

Browse online or download User Manual for Pumps Xylem MM 209D Series 6667 Replacement Mechanism. Xylem MM 209D Series 6667 Replacement Mechanism User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
INSTRUCTION MANUAL
MM-209D
Voltage Full Load Locked Rotor Pilot Duty
120 VAC 7.4 44.4 125 VA at
240 VAC 3.7 22.2 120 or 240 VAC
57.5 VA at
120 or 240 VDC
Series 6667 Replacement
Mechanism
Model 6667 on 120 VAC or 24 VAC Systems
Model 6667MV on Millivolt or 24 VAC Systems
Used on Series 61, 67, 69, 767, 70, and 70-B
Low Water Cut-offs
Series 6667
Before using product, read and understand instructions.
Save these instructions for future reference.
All work must be performed by qualified personnel trained in the proper application,
installation, and maintenance of plumbing and electrical equipment and/or systems in
accordance with all applicable codes and ordinances.
To prevent electrical shock, turn off the electrical power before making electrical
connections.
To prevent serious burns bleed off all pressure and let boiler cool down to 80˚F (27˚C).
Drain water level down below the control before taking the control out of the boiler.
Failure to follow this warning could cause property damage, personal injury or death.
WARNING
CAUTION
!
WARNING
On D.C. Service be sure to connect (+) positive
wire to terminal marked (2).
OPERATION
Maximum Steam Pressure: 20 psi
Approved
®
Electrical Ratings
Page view 0
1 2 3 4

Summary of Contents

Page 1 - Mechanism

INSTRUCTION MANUAL MM-209DVoltage Full Load Locked Rotor Pilot Duty120 VAC 7.4 44.4 125 VA at240 VAC 3.7 22.2 120 or 240 VAC57.5 VA at120 or 240 VDCSe

Page 2 - STEP 1 - Preparation

2a. See figure 1. Turn off all electrical power to the boiler. (There may be more than one powersource to the boiler). Bleed off all pressure and let

Page 3 - STEP 4 - Testing

3a. Follow STEP 1-a.STEP 3 - Installation on 69 Seriesb. See figure 2. Remove eight (8) screws (N) and clamping ring (O). Mark position of floatshield

Page 4 - TROUBLESHOOTING

Xylem Inc. 8200 N. Austin Avenue Morton Grove, Illinois 60053 Phone: (847) 966-3700 Fax: (847) 965-8379www.xyleminc.com/brands/mcdonnellmillerMcDonnel

Comments to this Manuals

No comments